Search This Blog

Showing posts with label mold assessment. Show all posts
Showing posts with label mold assessment. Show all posts

Thursday, January 24, 2019

NYC DEP Seeks Public Comments on Mold Notification Requirement

New York City Department of Environmental Protection (NYCDEP) is requesting public comments on a Notice of Mold Remediation Work.  A public hearing is being held on Wednesday, February 6, 2019, at 11:00 AM in the NYCDEP's 8th-floor conference room at 59-17 Junction Boulevard, Flushing, New York 11373.  The public comment period closes Wednesday, February 6, 2019.

Mold Growth in Corridor
Local Law Number 61 of 2018 (also known as Intro 978-D) amended the Administrative Code by adding a new Section 24-154, which provides that, before the performance of mold remediation work in certain buildings, the New York State-licensed mold remediation contractor must file a notice of mold remediation with NYCDEP no later than two business days before the project start date.  Section 24-154(c)(3)(b) further provides that notice may be filed within 24 hours after the project starts, instead of at least two days before, if the mold condition to be remediated poses an immediate risk of harm to any person or damage to property.  The purpose of the above public comment period is to establish a rule when such risk of harm exists.  In other words what the exception for two-day notification would be.  NYCDEP is proposing that projects that have at least 30 square feet or more of visible mold within one room or excessive water accumulation or flooding exists could notify NYCDEP 24 hours after the project starts with appropriate documentation that the condition exists.
Mold Abatement/Remediation/Assessment Course for Article 32 Licensing
Local Law 61 of 2018 went into effect on January 1, 2019.  The law requires licensing pursuant with New York State Department of Labor's Article 32 "Licensing of Mold Inspection, Assessment, and Remediations Specialists and Minimum Work Standards Law" to assess, remediate, and abate for mold incidents larger than 10 square feet.  The bill applies to residential buildings containing 10 or more units or commercial buildings larger than 25,000 square feet.  This law prohibits the owners or their direct employees from performing mold remediation or assessment work, which Article 32 allows.  Under this law, the person holding a mold assessment license must file with the NYCDEP a mold remediation form and work plan as well as a mold post assessment form and a mold certification form.  These forms are located at NYCDEP's Air Pollution website under Mold Remediation and Assessment.  It appears it will be an electronic submission and consists of a 6-page form for the mold remediation plan and a 4-page form for the mold post-assessment. 


Monday, May 07, 2018

PACNY's Environmental Conference, Part Three - Bomb Cyclone Hits

Winter Storm Riley at Turning Stone Casino
On the final day of the Professional Abatement Contractors of New York (PACNY) 22nd Annual Environmental Conference, we awoke in the middle of Winter Storm Riley which turned into a Nor'easter and hit Turning Stone Casino between Thursday night & Friday Morning, March 1-2, 2018 with about 7 inches of snow.  Some attendees left before the storm hit putting a further dampener on attendance.  Because of the storm, there was some concern that New York State Department of Labor (NYSDOL) would not be able to attend.  Because of a good Samaritan who helped NYSDOL representatives who were in the area get to the conference and the technological genius of Bob Krell, of Healthy Indoors Magazine, and Kevin Hutton, of Cornerstone Training, Dr. Eileen Franko was also present.

Peter Delucia, of AAC Contracting, discussing Crystalline Respirable Silica
The last day of the conference started with Peter Delucia, AAC Contracting, discussing "Managing the Many Facets of the Silica in Construction Standard."  Mr. Delucia did a great job presenting on topic and provided some excellent references related to preventing exposures, sampling, and complying with the Occupational Safety and Health Administration (OSHA) silica standard 1926.1153.  Mr. Delucia's presentation helped us develop our training courses for silica and our blog post "OSHA's Silica Standard - What's All the Fuss About?, Part Two".

NYSDOL's Presentation with Dr. Franco on Screen

The final presentation of the conference was the managers from NYSDOL, the Director Dr. Eileen Franko, present by video conference; Program Manager of Asbestos Control Bureau, Mr.  James Meachum PE;  Program Manager of Licensing & Certification Unit, Mr. Kirk Fisher; and Program Manager of Engineering Services Unit, Mr. Ed Smith, PE.  Some of the major points included:

  • Mr. Smith, announcing that they are looking into releasing some Fast Track Variances that would speed up the process of filing for a variance.  These variances could be used as they are written with no changes and those could be approved faster.
  • Mr. Smith gave us an update on the changes to Industrial Code Rule 56, including a Senate Bill (S06492) and Assembly Bill (A08254) that would remove the 1974 date from regulation for demolitions.  Mr. Smith also discussed some of the changes to New York City Department of Environmental Protection (NYCDEP) asbestos regulation Title 15.
  • Mr. Fisher announced a change in filing for a mold license for assessment and remediation companies that will require separate applications for a company license and an individual license for owners.
  • After being questioned when the removal of social security numbers from asbestos application process would happen.  Mr.Fisher informed us that would not happen in the foreseeable future.  The system they have is antiquated and there is no funding for updating it.  The system uses social security numbers to identify the holders of the various certificates.
  • Mr. Meachum discussed full-time asbestos project monitoring and the responsibilities of the project monitors being added to asbestos variances.
  • Mr. Meachum discussed the mold fact sheets that NYSDOL developed and they strongly recommend the fact sheets be provided to mold assessment/remediation clients.  In addition, Mr. Meachum announced that the first violations were sent out under Article 32, the Mold Licensing Law.  The violations were for not having a license and performing work and/or advertising as a mold professional. 

Steve Winograd & me at the PACNY Conference 
Attendance on the last day was down but it was still an excellent conference with lots of useful information.  We cannot say this enough about the excellent and hard work that Ms. Deborah Sanscrainte, of Aramsco, the conference chairperson and Ms. Lisa Brown, of Summit Environmental, Administrator put in to make the conference as good as it is.  Congratulations to the PACNY Board, as they continue to show why they are leaders for the abatement industry in New York State.

Wednesday, February 14, 2018

13 Days Till PACNY's 22nd Annual Environmental Conference!

Here we are again!  The Professional Abatement Contractors of New York's (PACNY's) 22nd Annual Environmental Conference is 13 days away.  As usual, we are excited for the conference and looking forward to going to Turning Stone Resort & Casino in Verona, New York to hear some presentations, gamble a bit, and enjoy some great networking.  We are sponsoring the conference, again.  So come visit Future Environment Design's (FEDTC) at booth 18!  Ms. Sheryl Esposito will be womaning the booth!  As we have done in the past, we will be tweeting the conference live at twitter.com/angelogarcia3 with the hastag #FEDTCPACNY on Twitter.  There are some exciting presentations we look forward to hearing, this year!

Long Island is Usually Represented by Some Entertaining Characters! 
Linda Reinstein, President & Co-Founder of the Asbestos Disease Awareness Organization and the Global Ban Asbestos Network, presentation on Thursday, March 1, 2018, is the keynote speaker.  She is inspiring and we are looking forward to hearing an update about the ban of asbestos under the current administration.  Mr. James Meacham, of the New York State Department of Labor (NYSDOL), presentation on Wednesday, February 28, 2018, "Solving the Mystery of the ACB" sounds intriguing.  Considering all the problems we have experienced on Long Island (Clemente Park & Dix Hills) with the dumping of asbestos and other hazardous materials, Richard Clarkson, of New York State Department of Environmental Conservation (NYSDEC), presentation on Thursday, March 1, 2018, on "Part 360 Revisions and Solid Waste Regulations" should be very interesting!  On the same day, Mr. Adam Andrews, of the American Council of Accredited Certifications (ACAC), presentation on "The Advantages of Certification for Indoor Air Quality" will give us a different perspective.  Mr. Bob Krell of IAQ Technologies and Healthy Indoors Magazine, presentation "Avoiding Potential Pitfalls of Mold Investigations and Remediation Projects" will close out Thursday.  Leading us into the cocktail reception in the exhibitor hall.

Cocktail Reception in the Exhibitor Hall
The final day of the conference typically starts with a presentation before NYSDOL's panel and round table discussion.  This year, we are looking forward to hearing AAC's Peter DeLucia's presentation on "Managing the Many Facets of the Silica in the Construction Standard".  It will be interesting to hear how a contractor is dealing with this new standard that went into effect in September 2017.  The conference will close out with the Panel from the NYSDOL featuring Dr, Eileen Franco, Director; Mr. James Meacham, PE, Program Manager; Ed Smith, PE, Engineering Services Unit; & Mr. Kirk Fisher, Licensing & Certification Unit.  They will be giving us an update on what they are doing and an opportunity to ask questions.  If you wish to attend you can register for the conference at PACNY's website.  We look forward to seeing you there.  It always a good time!

Yes it is!
   

Thursday, May 04, 2017

PACNY's Environmental Conference - The NYSDOL Round Table - Day Three and So It Ends!

Day Three of the Professional Abatement Contractors of New York's (PACNY's) 21st Annual Environmental Conference started with Mr. Angelo Garcia, III's, of Future Environment Designs, Inc, presentation "Changes Are A Coming."  Our presentation can be found in our dropbox folder under conference presentations.  We discussed the many changes that will affect the abatement/restoration industry including the Environmental Protection Agency (EPA) (the new Director and Toxic Substance Control Act (TSCA)); Occupational Safety and Health Administration (OSHA) (the new Director, Silica, Beryllium, Safety & Health Programs, Recordkeeping & Reporting Requirements; & the increase in penalties); New York State Department of Labor (NYSDOL) proposed asbestos regulation changes to Industrial Code Rule 56; and changes coming from NYSDOL on the mold regulation (Article 32).  Our presentation, was videotaped and is attached below. 

The DiVal Safety Equipment Hospitality Suite caused a few late comers on Day Three
The next presenter was Mr. Jack Springston, of TRC Environmental, discussing "Mold Clearance Testing - The Good, The Bad and The Ugly."  Mr. Springston's presentation discussed all the different sampling methods for mold from spore traps (has a capture zone that collects air about the size of a golf ball), particle counters (not specific), Environmental Relative Moldiness Index (ERMI) (still under research) and culture plates (tried and true method).  In addition, he discussed the variability of data from certified laboratories and the interpretation of the that data.

Mr. Jack Springston, of TRC Environmental
After Mr. Springston's presentation, we took one last break in the Exhibit Hall to network with exhibitors Admar Construction Equipment & Supplies and Paradigm Environmental Services.  Our staff, Ms. Kimberly Granmoe, Ms. Sheryl Esposito, and I would like to thank all of you who visited our booth this year.
Our Booth, Sheryl Esposito, Kimberly Granmoe, Veronica & Angelo Garcia III
  The NYSDOL Round Table as usual is the highlight of the PACNY Environmental Conference.  Having NYSDOL regulators at the conference allows for questions and answers that can be timely and very useful.  The panel consisted of Dr. Eileen Franko, Director-Division of Safety and Health, Mr. Ed Smith, P.E., Engineering Services Unit, Mr. Kirk Fisher, Licensing & Certification Unit, and Mr. James Meachum, P.E., Asbestos Control Bureau.

Dr. Franko, Mr. Smith, Mr. Fisher, & Mr. Meachum on the Dais, Left to Right
This year's presentation they came armed with alot of information that was very useful.  They presented an update on the mold regulation from 2016 including the number of complaints (40), the number that was related to issues NYSDOL could address (16), while the remainder was outside of their jurisdiction (24).  The number of mold training courses held in 2016 were 31 assessor (1348 attendees), 26 remediation (1,668 attendees), & 32 worker courses (2,284 attendees).  There are 553 mold assessor companies (451 individuals); 526 mold remediation companies (526 individuals); 910 mold supervisors; and 1,941 mold workers.  Compare that with the 21,237 asbestos handling certificates, and 1,539 asbestos handler licenses (companies).  In 2016, NYSDOL conducted 2,457 asbestos inspections, and resolved 494 cases with 1,094 violations.  The top violations include:

Discussing Top Ten Violations
  • Asbestos Survey Required; 
  • Certification & Training Required; and 
  • Licensing Requirements and Procedures      
As many of you know, our biggest complaint about NYSDOL is that they don't do enough to go after companies that do asbestos without an asbestos survey, an asbestos license, and asbestos certified workers.  These three were the top three violations issued by NYSDOL, which means we say BRAVO!  NYSDOL keep up the good work!  It was interesting to us that one of the top ten violations was not having a manometer or working one (this piece of equipment literally can be purchased for about $30-50, the fine can be $5,000).  One of the biggest issues discussed was the need for a mold rule and at this point NYSDOL does not see the need for a rule.  After some questions and answers the conference ended with lunch.  This year's conference definitely seemed more technical than previous years.  As a trainer, this year's conference has provided significant information to bring back to our classes and provide to our attendees.  We look forward to seeing your next year, which Future Environment Designs will be celebrating 30 years in business.   

In the past week, NYSDOL announced the training requirements for mold refresher training.  All mold licensees will have to take a 4-hour refresher course to renew the licenses.  We are currently working on the submittal to become approved for these courses.  Below is the video from our presentation from the conference.


Monday, August 24, 2015

NYS Mold Law Changes, Licensing Requirement Goes Into Effect January 1, 2016

On July 25, 2015 Governor Andrew Cuomo signed the Chapter Amendments to Article 32 of the New York State Mold Law.  The Chapter Amendments modify Article 32 adding new information, clarifying wording, and most importantly adding a deadline for licensing.  The deadline for licensing is now January 1, 2016.  

To assist people with the licensing requirements, Future Environment Designs has submitted three courses (mold worker, a two day course; mold remediation contractor a three day course; and mold assessment consultant, a four day course) for approval to New York State Department of Labor (NYS DOL).  We are hoping to be approved before November so we can start holding these classes in November & December, 2015 (give us a call to make arrangements).  

Mold Remediation Project in Nassau County. Licenses will be Required by 01/01/16.
NYS DOL has created a NYS Mold Program website.  At present, it has the original legislation, the chapter amendments and sample course outlines for the three licenses, along with an FAQ.

In our blogpost on February 7, 2015 we discussed the details of the law.  Some of the Chapter Amendments to Article 32, that revises the law include:
  • a modification of the definition of mold to "any indoor multi-cellular fungi".
  • Addition of the word "Project" and its definition, "means mold remediation, mold assessment, or mold abatement, of areas greater than ten square feet, but does not include (a) routine cleaning or (b) construction, maintenance, repair or demolition of buildings, structures or fixtures undertaken for purposes other than mold remediation or abatement."  So licensing is not required for routine cleaning (this seems like it could be abused) and mold projects 10 (2' x 5') square feet (SF) or less.
  • The addition of "on a project" for what is unlawful.  For example, "It shall be unlawful for any individual to engage in mold abatement on a project or to advertise or hold themselves out as a mold abatement worker unless such individual has a valid mold abater's license issued by the commissioner."  The same has been added to the mold assessment & remediation licenses.
  • Changes were made to the minimum requirements to get a mold assessment license.  Particularly a requirement for insurance to get the mold assessment license.  The mold assessment business entity "must provide insurance certificates evidencing workers' compensation coverage, if required, and liability insurance of at least $50,000 providing coverage for claims arising from the licensed activities and operations performed pursuant to this article."
  • Substantial change to the minimum requirements for a mold remediation license include the elimination of the requirement for a financial statement audited by an independent auditor.  Mold remediation license will require providing "insurance certificates evidencing workers' compensation coverage, if required, and liability insurance of at least $50,000 providing coverage for claims arising from the licensed activities and operations performed pursuant to this article."
  • Fees were changed.  Mold Remediation license fee is to be between $500 - $1,000.  Mold Assessment license fee is to be between $150 - $300.  Mold Abatement (worker) license fee is to be between $50 - $100. 
  • Exemptions have changed.   Added to the list are "an owner or a managing agent or a full-time employee of an owner or managing agent who performs mold assessment [or], remediation, or abatement on a residential apartment building of more than four dwelling units owned by the owner provided, however, that this subdivision shall not apply if the managing agent or employee engages in the business of performing mold assessment [or], remediation, or abatement for the public;" and "a federal, state or local governmental unit or public authority and employees thereof that perform mold assessment, remediation, or abatement on any property owned, managed or remediated by such governmental unit or authority."
  • Nothing has really changed between the difference between assessment and remediation and the conflicts of interest between them.
  • One minor change was done to the minimum work standards which was a rewording and the replacement of "must" with "may".  Basically removing the requirement of a containment, and allowing a remediation plan not to require containment.

Mold Licensing will not be required for projects 10 SF or less or routine cleaning.
 Since NYS DOL has moved forward with the training requirements and has started the process of approving training providers, the next steps seem to be clarifying who is required to be trained for mold assessment and remediation (owners, supervisors, foremen, industrial hygienists, etc.).  In addition, the standards for assessment and remediation need to be fleshed out for a better understanding of what is expected.  Another words still alot to do between now and January 1, 2016. Tick Tock! Tick Tock!

Conference Season Starts in 3 Months Save the Date: PACNY 2025 Environmental Conference & EIA 2025 National Conference

With the end of 2024 fast approaching, we are looking ahead to 2025, we are excited to announce the dates for the Professional Abatement Con...