Search This Blog

Monday, August 01, 2011

NYS Senate Considering Asbestos Notification Fee Changes

ALBANY, NY - JUNE 16: The New York State Senat...Image by Getty Images via @daylifeThe New York State Senate is considering changes to the notification fees paid by residential homeowners.  These changes are being considered, because currently, a very small percentage of asbestos project notifications are received from projects involving owner occupied one or two family structures.  The NYS Senate believes that so few of these notifications are received because the current fee structure is cost prohibitive, which results in homeowners either doing the abatement project illegally themselves or not doing the project at all.  If home-owners are charged a fee of no more than five hundred dollars ($500) for the project notification it will result in improved compliance and an increase in the number of homeowner asbestos project notifications received by the NYS Department of Labor, since it would become more economically feasible to comply with the law.   For more information S748-2011 can be found at: http://m.nysenate.gov/legislation/bill/S748-2011.

 Related articles
Enhanced by Zemanta

Friday, July 29, 2011

Judge Stops Changes to Manufacturers Trust Company Building

Marble Columns Required Protection from the Poly, Spray Glue, & Duct Tape.
This article in the New York Times regarding "Judge Stops Changes to Manufacturers Trust Company Building" brought back some memories for me.  Manufacturers Hanover Trust Company (MHT) was one of Future Environment Design's first and largest clients.  Over the time we worked with MHT we removed alot of asbestos containing materials, including troweled-on amosite asbestos containing reflectance material on the first and second floors of 510 Fifth Avenue, New York.  This building was the location of our most profitable and successful projects.  We actually discuss this project in our initial asbestos project designer classes (reviewing the original asbestos drawings and discussing problems with amosite asbestos and negative air units).  MHT wanted to perform an energy efficient upgrade to reduce the amount of electricity they were using to light the first and second floor 510 Fifth Avenue.  In addition, New York City Landmarks Preservation Committee had landmarked the building, so the general contractor (Adelhardt Construction Corp.) had to figure out how to maintain the appearance while also saving electricity.  Under that landmark interior was troweled-on amosite asbestos containing reflectance material.  As the asbestos consultant for MHT, we designed the asbestos removal portion of the project.  The entire project ended with an extremely happy client that had a payback period of 1-2 years and the project came in under budget by at least 1 million dollars.
Enhanced by Zemanta

Wednesday, July 27, 2011

NYS Education Department Issues Clarification on Asbestos Material Testing



New York State Education Department's Office of Facilities Planning newsletter #107 (July 2011) issued clarifications regarding asbestos material testing that were brought up by the New York State Department of Health' Environmental Laboratory Approval Program's (ELAP) FAQ.  Major points from the newsletter:
  • Review your management plans and data, and determine if the ceiling tile results were obtained through an appropriate test, ELAP items 198.6 or 198.4.  If the tiles were correctly tested in accordance with the current protocols and the data are available, no additional testing is required. If that information is not available, or if the results were not obtained in accordance with ELAP items 198.6 or 198.4, school districts should consider testing as either part of an existing or planned capital improvement or as an independent analysis prior to disturbance.
  • Be aware that ceiling tiles and other products purchased today can still contain asbestos, but many manufacturers offer documentation as to the asbestos free nature of their products.  Some manufacturers date stamp ceiling tiles.  If you can provide documentation of when and where the tiles were purchased and installed, the manufacturer should be able to provide documentation or certification that they do not contain ACM, and your management plan should be updated accordingly.
  • If you have documentation that your ceiling tiles or other materials are non-ACM, additional testing is not required, however, as in any investigation, actual bulk sample results would supersede documentation in an analysis of the situation.
  • Check the ELAP list, contained in the web links above, to see if any other materials in your school that may be disturbed such as vinyl tile, mastic, caulking, etc, were tested under the correct protocol, and the results are available.  If these items were not tested properly under the current protocol with negative results they should be considered for additional sampling prior to any disturbance.
  • If ceiling tiles and other materials are found to be asbestos containing under the current analysis method, the schools asbestos management plan must be updated in accordance with AHERA regulations.  Areas with significantly damaged ceiling tiles must be isolated and the damaged areas removed in accordance with AHERA and code rule 56.  Districts should consider whether to undertake capital projects if certain ceilings must be accessed on a regular basis.

Considering my reccent article in Future Focus, it seems like someone else is thinking along the same lines as myself.

Enhanced by Zemanta

Friday, July 22, 2011

Where Should Your Necktie Tip Fall?

A tie dimple, photo taken by User:Pumbaa80Image via WikipediaThis interesting video teaches you where you necktie tip should fall.  Menswear expert Antonio Centeno gives you a definitive answer as to how long you should tie your tie.  Mr. Centeno has some great videos helping us guys with dressing properly and purchasing clothes.  Find the video at http://www.youtube.com/watch?v=fyNISJUiKf4&feature=uploademail.  For safety reasons you should make sure you tie you necktie above the belt buckle and strongly recommend you make sure your tie is in your shirt when inspecting equipment.  This way the necktie will not catch in the equipment.  Leading to serious injuries.

Enhanced by Zemanta

Thursday, July 21, 2011

Future Environment Designs sponsors Bacillus anthracis and Anthrax Video

Shown is an anthrax culture. The disease anthr...Image via WikipediaFuture Environment Designs is proud to sponsor a new informational video on Bacillus anthracis and Anthrax.  This video is designed as a public service awareness video on the topic of Anthrax which is caused by the bacteria Bacillus anthracis.  Future Environment Designs can provide hazard specific training on this subject, especially for office staff that may be concerned regarding suspicious packages or mail. 
Enhanced by Zemanta

Tuesday, July 19, 2011

Major Recall of Shock Absorbing Lanyards Under Way

Petzl America Inc. of Clearfield, Utah, has voluntarily recalled about 375,000 Scorpio and Absorbica shock-absorbing lanyards that have been sold since 2002, the U.S. Consumer Product Safety Commission announced July 12. Some of the lanyards are missing a safety stitch on the attachment loop, which could cause the lanyard to separate from the climbing harness, the posted announcement states.
Enhanced by Zemanta

Conference Season Starts in 3 Months Save the Date: PACNY 2025 Environmental Conference & EIA 2025 National Conference

With the end of 2024 fast approaching, we are looking ahead to 2025, we are excited to announce the dates for the Professional Abatement Con...