Search This Blog

Wednesday, October 13, 2010

Carl Potter's Safety Code of Conduct

Scaffolding improperly installed missing mud sills, etc.
Mr. Carl Potter is a safety speaker and his website is an excellant resource for information regarding occupational safety and health.  We have received many of his articles and writings, and have always found them informative.  To emphasize this point, please click on the title above to read his latest post regarding setting up a Safety Code of Conduct and the reason why employees typically don't follow safety rules.  Our experience and discussions with many of you, has led us to the same conclusions.  We agree with Mr. Potter come up with your own Safety Code of Conduct and decide to be safe when performing your work.  
Enhanced by Zemanta

Friday, October 08, 2010

EMLab P&K Products Division Blog Features - Proper Maintenance of Sampling Equipment


Anderson N-6 Bioaerosol Sampler.

If you use or own indoor air quality equipment we recommend that you read EMLab P&K Products Division Blog.  Click on the title of this blog post to read EMLAB P&K's blog post on the proper maintenance of air sampling equipment, such as the Anderson or A6 impact bioaerosol samplers, rotary vane high volume pumps, and Wallchek adapters.  In addition, it discusses the importance of proper maintenance to sustain consistent sample collection. The blog reminds us that the American Conference of Governmental Industrial Hygienists (ACGIH) recommends calibrating pumps before and after sample collection with variances not to exceed 5 to 10%.  This calibration should be performed using a primary standard such as a bubble meter (1000 cubic centimeter bubble buret) or an electronic device such as the Dry Cal® DC-Lite Calibrator, Gilian® Gilibrator-2, and Bios Defender™.  These primary standard must be traced to a National Institute of Standards and Technology (NIST) standard.  It will keep your equipment running at peak condition.
Enhanced by Zemanta

Thursday, October 07, 2010

NYS Requires Crane Operator Certificate of Competence


With the new Occupational Safety and Health Administration (OSHA) regulation gradually going into effect, one of the more interesting parts of the regulation is the fact that the regulation does not pre-eminent state and local regulations
Crane operators in New York State must realize in addition to complying with the new OSHA regulation, they must also comply with New York State requirements that requires them to get a Certificate of Competence.  This requirement applies to all cranes having a manufacture’s maximum rated capacity exceeding five tons or over forty feet of boom length and to all tower cranes. This applies whether the crane is used for construction, demolition, or excavation work.
Enhanced by Zemanta

Wednesday, October 06, 2010

ADA Construction Caught Illegally Mining Sand in Melville

Headquarters of the New York State Department ...Image via WikipediaA joint investigation between Huntington Code Enforcement Officials and New York State Department of Environmental Conservation (NYS DEC) found that ADA Construction Corp. had mined 6,000 cubic yards of raw sand and then dumped 8,000 cubic yards of solid waste to backfill the excavation behind Bagatelle Court in Melville, Long Island
A separate inspection by the NYS DEC of ADA Construction Corp's Solid Waste Management Facility in Inwood found the site had exceeded its authorized storage limit.  The NYS DEC inspection found 23,000 cubic yards of debris and the facility was only allowed to store 5,000 cubic yards (it was over its limit by 18,000 cubic yards).
ADA Construction Corp is owned by Anthony Frank Falcone, president, and his son, Anthony Vincent Falcone, also owner of Varatech Industries Inc., were found to be in violation of multiple state environmental conservation laws.  The Falcones signed a consent order that required them to remove all of the solid waste from the Melville site, restore the illegal excavation with clean fill material, reduce the volume of material at its Inwood facility, and pay a $150,000 penalty.
Enhanced by Zemanta

Sunday, September 26, 2010

NYS Labor Department Issues Stop Work Order in Lockport

Re-enactment of the Gunfight at the O.K. Corra...Image via WikipediaIt seems Mr. Scott Krzyzanowski, the owner of 89 Mill Street in Lockport, does not know New York State has one of the strictest asbestos regulations in the country.  He has been told by the New York State Department of Labor numerous times to hire an asbestos contractor to cleanup the "eyesore" at 89 Mill Street, Lockport, NY.  It appears he is ignoring the Department of Labor and they have issued a "Stop Work Order" on the project.  If he continues to ignore the Department of Labor he will be subject to penalties and jail time.  It looks like a showdown at the OK Corral will be happening.  We will see who blinks first?
Enhanced by Zemanta

Friday, September 24, 2010

Future Environment Designs Sponsors Asbestos Video



Future Environment Designs sponsored this video to assist with Keeping Your Family Safe by being aware about the dangers of Asbestos.  Realize New York State and New York City asbestos regulations are some of the strongest in the country and both regulate residential asbestos isnpections, removal, and monitoring.




Enhanced by Zemanta

Thursday, September 23, 2010

Future Environment Designs wishes all of you a Merry Holidays and a Happy New Year! EPA delivers an early holiday present!

As we say goodbye to 2024 and welcome 2025, we reflect on 2024 and how it has changed us.  2024 has been a good year for Future Environment ...